Troubleshooting > Failures par brand > YAMASAKI > YAMASAKI RAPTOR 50 > The headlight and brake light of my YAMASAKI motorcycle RAPTOR XNUMX no longer work

The headlight and brake light of my YAMASAKI motorcycle RAPTOR XNUMX no longer work

In the vast majority of cases, it is a Bulb fault which will lead you to make the change. After removing the protective cover, check the condition of the filament. If this is cut, the Bulb must be changed. The new Bulb must have the same power as the Bulb damaged.

My YAMASAKI motorcycle RAPTOR XNUMX has a headlight problem

The bulb of your YAMASAKI motorcycle RAPTOR XNUMX grilled

Never touch the glass of a Bulb with your fingers. For added safety, it is recommended that you always have a set of spare bulbs for your vehicle so that you do not get stuck in the dark in the event of a breakdown.

Si the bulb your headlight is in good condition, the failure may be related to the plate headlight .

Find our guide to choose your bulbs for XNUMXcc.

Find our tutorial: changing a headlight bulb.

The flagship of your YAMASAKI RAPTOR XNUMX no longer works

First, check the connectors and contacts. They can sometimes present trace s of oxidation. If this is the case, a simple brushing with sandpaper will suffice. The failure can also come from fuses .

After you turn off the ignition and locate it fuse checking the bulb that no longer works, take it out of its housing. After the change of fuse , turn on your headlight . If the latter remains off, check the condition of the fuse that you just changed. If its filament is cut again, the problem is a short circuit.

A short circuit can be caused byar humidity or par damaged wiring. If the damaged cable is accessible, you can temporarily repair it by wrapping it in several layers of masking tape to protect the stripped cable.

It is possible that the problem is also caused by the switch box . In fact, over time, the contactor may have moved in the switch box or the code switch / headlight can be blocked.

Find our tutorial: change your headlight plate.

My YAMASAKI motorcycle RAPTOR XNUMX has a brake light problem

The stop lights are mandatory on all motor vehicles since they alert other cars to braking. Unlike other lights, stop lights should not be enabledar they come on automatically when the brake lever or pedal is pressed.

There are several symptoms that can indicate a problem or failure with your stop lights .

The brake light flashes with the indicators on my YAMASAKI RAPTOR 50

it is surely a bad contact or a mass problem. Check your headlight wiring and connections. Also clean the connectors with a metal brush. Spray contact cleaner.

The brake light stays on on my YAMASAKI RAPTOR 50

this is probably a problem with the switch of brake. Change your switch brake to solve the problem.

The brake light no longer comes on on my YAMASAKI RAPTOR 50

This is most likely a problem with the switch brake or fuses . Start par change them fuses , if the problem persists you will certainly have to change the brake light switch.

Also check that the bulb is not toasted.

FINDEZ ALL OUR PARTS ET ONGOING ACCESS OIRES FOR TWO-WHEELS ON XNUMXFACTORY .COM

XNUMX% of products shown as in stock actually are!