FILTER BY
Loading ...
General information > Tips and Guides > Tutorials > XNUMX with box > Cycle parts > Mount handlebar clamps
Ce tutorial aims at you help mount XNUMXmm handlebar bridges on an XNUMXmm of your boxed XNUMXcc thanks to pics and explanations associated. In this example we used the red handlebar bridges but you will find here all our range of bridges .
Difficulty :
Temp s necessary:
XNUMX minutes
Necessary material:
1) There are two different handlebar diameters (XNUMXmm and XNUMXmm), choose the saddles of the right diameter!
2) Disassemble your original handlebars (diameter XNUMXmm) using the BTR key.
3) The handlebar XNUMXmm can not be mounted on the XNUMXmm bridges.
4) It will therefore install bridges XNUMXmm.
5) Screw them correctly.
6) Mount the handlebar in XNUMXmm.
7) Screw the upper part of the saddles.
8) Your bridges in XNUMXmm are installed, you can reassemble your cockpit.
The installation of handlebar bridges is relatively simple and will give a new look to your XNUMXcc gearbox. They will also allow you to raise and above all adapt a handlebar of another diameter! They are adaptable to the majority of XNUMXcc gearboxes like the Derbi, Aprilia, Yamaha, Peugeot and many others...