Ce tutorial aims at you help change the kick and gear selector from your 50 to box thanks to pics and explanations associated. In this example we used a mécabox with a motor Derbi Euro 2 but the principle is the same for the different engines (Derbi Euro 3, AM6 et Generic). Discover our selection of kick-start and gear selector.
Difficulty :
Temps necessary:
5 minutes
Necessary material:
1) Remove your kick using your 8mm open key.
2) Remove it properly (it should come easily).
3) Position your new kick.
4) Screw it tight using your open-end wrench.
5) Your gear selector is unscrewed using a BTR screw located on the top of the part.
6) Remove it correctly.
7) Place your new gear selector and tighten well using your BTR key.
Installing a new kick and gear selector on your 50cc box is very simple. You will find at 50factory.com kicks et gear selector of different colors. You can add to your two wheels a personal touch and make it unique! Discover our wide range of engine parts.