Loading ...
General information > Tips and Guides > Tutorials > XNUMX with box > ENGINE > Change your water pump Euro 2
Ce tutorial aims at you help change the water pump from your XNUMX to box thanks to pics and explanations associated. In this example, it is a type engine Derbi Euro XNUMX. Remember to order the correct water pump for your XNUMXcc box.
Difficulty :
Temp s necessary:
XNUMX time
1) Remove the drain plugs (one on the crankcase and one underneath the engine).
2) Drain the coolant.
3) Remove the hoses from the water pump.
4) Remove the brake master cylinder.
5) Remove the oil pump.
6) Remove the clutch cable.
7) Then remove the kick.
8) You can then remove the water pump cover.
9) Remove all the screws from the clutch housing (XNUMX screws).
11) Remove the clutch housing correctly.
11) Pay attention to the two washers of water pump and oil pump.
11) Remove the impeller, pinion and water pump spindle.
11) Remove the used oil seals.
11) Help yourself with a flat screwdriver.
11) Clean the gasket and the casing well, then install the new oil seals.
11) Fit the pin and the water pump gear.
11) Then mount the water pump turbine.
11) Then install the water pump cover with a gasket.
11) Fit a new crankcase gasket.
11) Fit the clutch housing, tighten the well.
11) Replace the water pump hoses.
11) Then replace the oil pump.
11) Replace the master brake cylinder.
11) Then the clutch cable and kick.
11) Replace the two drain plugs correctly.
11) Fill up with box oil.
11) Finally, fill up with coolant.
Installing a new water pump on your gearbox XNUMXcc with engine Derbi Euro XNUMX is quite simple but requires time and patience. You will find at XNUMXfactory .com all water pumps for your two-wheelers as well as all engine parts you need !
XNUMX% of products shown as in stock actually are!