Loading ...
Troubleshooting
>
Failures par brand
>
Longbo
>
LONGBO LB XNUMX Y
> What checks should be carried out before hitting the road with your LONGBO LB XNUMX Y motorcycle?
Before riding, it is important to make a small inspection of the elements of your two wheels. This is a quick and easy verification set.
Gearbox oil level is correctprox imaginatively from XNUMXml vacuum engine. The gearbox oil change is carried out every XNUMXkm.
In order to check the oil level, it is enough simply to open the
level screw
on the housing:
â†' If the oil is flowing, the level is OK.
â†' If the oil flows too abundantly, there is too much oil in the box.
Be careful if you are above the maximum, the overflow risks damaging a
gasket
. In this case, remove the excess.
Check that the headlight is in good condition. For adjustment place your headlight towards a wall, preferably in the dark.
Adjust your headlight:
XNUMX) Place your two wheels XNUMX meters from a wall.
XNUMX) Measure the height, from the ground to your headlight.
XNUMX) Transfer the height to the wall.
XNUMX) Set the brightness XNUMX to XNUMX cm below the height you reported.
Check
high beam indicator
on your meter.
Also check the tail light, license plate light, brake light and reflectors.
It is very important to check the good condition of the
wing mirror
, that they are correctly attached and adjusted. They allow you to monitor the road behind your two wheels from your saddle.
Check the condition and the pressure of the
tires
. If there is no trace cracks, cuts or loose bodiesranger s. The engraving should be visible and deeper than the wear indicator. The tire pressure must be sufficient to ensure optimal performance of your two wheels.
Visual control of the chain:
â†' Too much tension = premature wear.
â†' Tension too low = risk of breakage.
It is necessary that the
chain
has a XNUMX to XNUMX mm beating between top and bottom. Chain lubrication is also part of regular maintenance to preserve its longevity.
XNUMX% of products shown as in stock actually are!