Edit page title TUTO: Changing the handlebars and grips - XNUMXfactory .com
Edit meta description Find out how to change the grips and the handlebars of your all brands boxed motorcycle. Technical and detailed guide.
Edit page URL
Close edit interface

Parts and equipment for motorcycles, quads, scooters and bicycles

General information > Tips and Guides > Tutorials > XNUMX with box > Cycle parts > Change your handlebars and grips

  Tutorial: How to change handlebars and handles

 

Ce tutorial aims at you help replace your original handlebars and grips of your boxed XNUMXcc. The example presented here concerns the handlebars of a Derbi Senda DRD X-Treme. The pieces presented are blue aluminum handlebars , coating handles Domino blue  et a handlebar foam Doppler Blue . 

 

HOW TO CHANGE YOUR HANDLEBAR ET HIS HANDLES

1) Remove the cover handles. If they don't come by pulling on them, you can run a flat screwdriver (or a gun) underneath to help. If they are glued, take out your cutter and cut them lengthwise.

2) Disassemble the left commodo using an XNUMX mm BTR key (XNUMX fixing screw).

3) Slightly loosen the gas handle using an XNUMX mm BTR wrench (XNUMX fixing screw). It is not necessary to disassemble the handle entirely.

4) Then dismantle the front brake master cylinder using an XNUMX mm pipe wrench (XNUMX screw).

5) Loosen the handlebar clamps using an XNUMX mm BTR wrench (XNUMX screws).

6) Remove the old handlebar.

7) Position the new handlebar taking care to properly thread the gas handle. Only tighten the saddles at the end of the assembly, depending on the desired position of the handlebars.

8) Follow the reverse procedure to reassemble the handlebars, the throttle grip, the brake master cylinder and the clutch grip (left hand switch).

9) Reassemble your handles after cleaning and degreasing the handlebars and the gas handle (the thickest on the left side. The other on the right).

11) Put on your new handlebar foam and admire the result!

You will find at 50Factory all types of handlebars. Handlebars custom s like original handlebars adapted to your boxed XNUMXcc or your scooter. You can also find the handlebars , the handlebar bridges  et foam handlebars of your choice. Many colors are available. Find par example the original handlebars for TNT Otto, TNT Grido, Peugeot Kisbee, Piaggio Zip and the handlebars cross for mécaboite.

Discover here the different coating handles in accordance with the style of your two wheels. Many colors and many brands are also available at XNUMXfactory . Com.


HERE XNUMX% OF THE PARTS INDICATED IN STOCK REALLY ARE!