TUTO CHANGING THE BELT OF YOUR SCOOTER

HOW TO CHANGE YOUR BELT

1) Unscrew the screws of the casing by finishing par the middle one and remove the casing.

2) Remove the noise suppressor.

3) Unscrew the spark plug.

4) Install the piston lock in place of the spark plug.

5) Loosen the clutch bell nut using the impact wrench. Remove the bell.

6) Remove the belt from the clutch.

7) Remove the fixed cheek from the variator. Pay attention to the nut and washer when removing it.

8) Remove the belt.

9) Install the belt on the clutch.

11) Replace the clutch.

11) Replace the clutch housing. Tighten the nut with the impact wrench.

11) Place the belt at the variator.

11) Replace the fixed cheek of the variator, the washer then tighten the nut.

11) Remove the piston lock.

11) Replace the spark plug and the suppressor.

11) Reassemble the casing.

Installing a new belt on your scooter requires tools particular and requires patience and precision.

Almost all scooters are equipped with a belt which transmits the force of the motor to the rear wheel and also serves as a speed reducer by connecting the variator located at the rear wheel. output of the engine to the clutch located at the rear wheel, ensuring a variable reduction. She is trapezoidal.

It is important to change the transmission belt on your scooter at least once par an, to regain all the acceleration and extension of the engine.

You will find at XNUMXfactory .com of belts for different makes and models of scooters as well as the different parts transmission for your machine.

Also discover our wide range of engine parts for scooter . Find on our website our cleaning products et consumables for regular maintenance of your machine.

BACK TO ALL TUTOS