Parts and equipment for motorcycles, quads, scooters and bicycles

General information > Tips and Guides > Tutorials > Moped > Electrics > Change the electronic ignition of your moped

TUTORIAL TO CHANGE THE ELECTRONIC IGNITION OF YOUR MOPED

Ce tutorial aims at you help replace electronic ignition on your typical moped Peugeot 103

The ignition of the moped is made up of several elements:

Le ignition rotor whose shape varies according to the models and the stator which controls fuel combustion to produce the starting spark. It is equipped with a battery and an ignition coil which provides the voltage necessary for the spark.

The ignition is an electronic device that burns the fuel-air mixture to start the engine. It directly affects engine performance.

HOW TO CHANGE THE IGNITION OF YOUR MOPED

change ignition stage 1

1) Remove the ignition side side fairing

change ignition stage 2

2) Remove the ignition cover

change ignition stage 3

3) Unplug the suppressor

change ignition stage 4

4) Remove the candle

change ignition stage 5

5) Install in place of the spark plug the piston lock.

change ignition stage 6

6) Remove the ignition nut

change ignition stage 7

7) Place theflywheel puller instead of ignition nut

change ignition stage 8

8) Remove the ignition rotor

change ignition stage 9

9) Remove the screws that hold the stator - 4 screws

change ignition stage10

11) Disconnect the stator from the coil (round terminal), the CDI box (black plug) and the regulator (small white plug).

change ignition stage11

11) Remove the stator.

change ignition stage12

11) Install the new stator. Fix it by starting par the lower screws then the other 2.

change ignition stage13

11) Run the cable through the frame.

change ignition stage14

11) Reconnect the stator - black plug to CDI box, white plug to regulator, round terminal (ground wires) to coil.

change ignition stage 15

11) Install the new rotor.

change ignition stage16

11) Tighten the nut.

change ignition stage17

11) Replace the ignition cover.

change ignition stage18

11) Remove the piston lock.

change ignition stage19

11) Replace the spark plug.

change ignition stage 20

11) Reconnect the suppressor.

change turn on step 21

11) Replace the side fairing.

Installing a new ignition on your moped is quite simple but requires patience and precision.

There are different ignition patterns.

You can change your complete ignition but you can also change the parts independently. As Par example the ignition coil, CDI case, ignition cover, ignition stator and rotor.

Remember to consult the other categories of electricity to find all your parts: electricity accessories, spark plug , switch box , Speedometer, lighting, beam and components, horn.

Also discover our wide range of engine parts for mopeds. Find on our website our cleaning products et consumables for regular maintenance of your machine.

VIDEO: CHANGING THE IGNITION OF YOUR MOPED


HERE 100% OF THE PARTS INDICATED IN STOCK REALLY ARE!