Edit page title GUIDE: My SHERCO motorcycle SE XNUMX gets too hot, what to do? - XNUMXfactory .com
Edit meta description Your SHERCO XNUMXcc SE XNUMX gets too hot and you can't find the fault. We help you and offer you the necessary parts for the repair of your vehicle.
Edit page URL
Close edit interface

Troubleshooting > Failures par brand > SHERCO   > SHERCO SE 50 > My SHERCO motorcycle SE XNUMX gets too hot

My SHERCO motorcycle SE Box gets too hot

Your mà © caboîte XNUMXcc SHERCO SE 50 too hot in the cylinder? This can be due to several issues. It is possible that your machine heats up too much after driving for a long time and at a fast pace, or vice versa, that it heats up too much after barely XNUMX km / h. In most cases this is a problem of coolant . Indeed, the latter may be too old or the level not good. It may also be a problem with the cylinder or water pump . Please note, this type of failure only concerns box models fitted with a liquid (and not air) cooling system.

re-darkening Aprilia 50

Your SHERCO motorcycle SE XNUMX heats too much?

If you notice that your SHERCO boxed motorcycle SE XNUMX heats too much at the cylinder, this is usually a problem with the coolant :

- The coolant level is not correct. Fill up with coolant up to the line indicated on the expansion tank .

- The coolant is too old. Indeed, if your liquid has been in the expansion tank , it can overheat your cane. Replace it.

In any case, we advise you to perform a coolant drain in order to obtain optimal driving conditions and not to damage your SHERCO box. SE XNUMX. To drain your coolant, disconnect the hose at the lowest point then open the expansion tank and refuel.

Warning: a cylinder that heats too much can cause your machine to tighten!

Your SHERCO XNUMXcc SE XNUMX gets too hot, even with recent coolant?

If the cylinder of your SHERCO SE XNUMX is still hot even after you have drained your coolant, there could be several issues:

- La water pump or radiator are HS. Check them, and replace them if necessary.

- The carburettor is not set correctly. In this case, perform a carburetor adjustment or contact a professional to do it.

- The thermostat is HS. Many people decide to remove it altogether. We recommend that you replace it.

- The base gasket or cylinder are HS. This is a more serious failure. But if necessary, proceed with a complete replacement of your cylinder.

refroidissement AM6 aprilia

XNUMX% of products shown as in stock actually are!