Brake fluid reservoir with universal hose Ø7mm

Universal brake master cylinder reservoir kit

Jar of brake fluid with new hose adaptable for motorcycle, scooter, moped 50cc, 125cc and other displacements.

Includes

• 1 x jar
• 1 x cap
• 1 x membrane
• 1 x hose
• 2 x necklaces

Technical characteristics and dimensions

• Brand: generic
• Material: rubber and plastic
• Thread diameter of the jar: 38mm
• Outer diameter of the jar: 40mm
• Total height of the jar: 60mm
• Total length of the hose: 330mm
• Outer diameter of the hose: 11mm
• Inner diameter of the hose: 7mm

This jar of universal brake fluid with hose Ø7mm will be installed on all types of two wheels. However, some modifications will have to be made according to the vehicle models. Bring yourself a Phillips cross-head screwdriver to fix the jar as well as a needle-nose plier to put the hose clamps.

Trick: Most of the time, the problem is that the hose Ø7mm is too big. In this case we advise you to cut a piece of hose Ø5mm (1cm to 2cm maximum) and install it on the end of your master rear brake cylinder so as to make a "double thickness". Then, installing the hose clamp, the hose will not come off.