Rear sprocket 60 teeth steel 420 Malaguti 50 XSM (before 2003)

Rear sprocket 60 teeth Malaguti XSM 6 fasteners

Transmission tray par new chain adaptable for motorcycle 50cc Malaguti XSM before 2003.

Attention there are several montages on the Malaguti Xsm, mounting at 6 fastener holes is uncommon, check on your bike beforehand.

Technical characteristics and dimensions of the rear toothed pinion

• Brand: generic
• Drive train type: 420
• Number of teeth: 60
• Material: steel
• Colour : grey
• Number of fixing holes: 6
• Diameter of fixing holes: 8 mm
• Crown Fixing Hole Type: Smooth
• Fixing centers: 45 mm and 90 mm
• Inner diameter of the crown: 54 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.