FILTER BY

Couronne 50 dents alu 420 Husqvarna CR, TC 65, KTM SX 60, 65 ... Afam

33,90

K33085C415

IN STOCK

NEW

Delivery possible from Wednesday 22 September

Get 3 Points fidelity0,60


Afam

We also recommend

Description

Rear sprocket 50 teeth Afam Husqvarna CR, TC 65, KTM SX 60, 65 ...

Transmission tray par new chain adaptable for motorcycle cross, enduro 60cc, 65cc et 85cc Husqvarna CR, TC, KTM SX.

Technical characteristics and dimensions of the rear toothed pinion

  • Mark: Afam
  • Drive train type: 420
  • Number of teeth: 50
  • Material: aluminium
  • Colour : grey
  • Number of fixing holes: 5
  • Diameter of fixing holes: 8mm
  • Type of crown mounting holes: countersunk
  • Fixing centers: 68mm and 110mm
  • Inner diameter of the crown: 98mm
  • Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (6mm width, 12.7mm pitch) but some 50s and most 125s use the 428 (7mm width, 12.7mm pitch) even for 125 in 520 (6mm width, 15.8mm pitch). All the parts of the kit, namely the pinion, the chain and the crown.vent imperatively to be of same type.

COMPATIBLE MODELS

Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.

Moto tout-terrain

HUSQVARNA
  • CR 65 2T
  • TC 65 2T
  • TC 85 PETITES ROUES 2T
KTM
  • SX 60 2T
  • SX 65 2T

Products already seen

HERE 100% OF THE PARTS INDICATED IN STOCK ARE REALLY IN OUR DEPOT!