Crown 40 aluminum teeth 520 Montesa Cota 310, 311, 314 R and 315 R Afam

Rear sprocket 40 teeth Afam Montesa Cota 310, 311, 314 R and 315 R

Transmission tray par new chain adaptable for enduro motorcycle 310cc, 311cc, 314cc and 315cc Montesa Cota.

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 78303-40
• Drive train type: 520
• Number of teeth: 40
• Material: aluminium
• Colour : grey
• Number of fixing holes: 6
• Diameter of fixing holes: 8 mm
• Type of crown fixing holes: shouldered
• Fixing centers: 39 mm, 73 mm, 99 mm and 112 mm
• Inner diameter of the crown: 94 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

applications:

MONTESA / HONDA 310 (1990)
MONTESA / HONDA 311 Honda (1992 - 1993)
MONTESA / HONDA 314 R Honda (1994 - 1996)
MONTESA / HONDA 315 R Honda (1997 - 2004)