Parts and equipment for motorcycles, quads, scooters and bicycles

Crankshaft Derbi Euro 3, Euro 4 Doppler ER1

Crankshaft Derbi Euro 3 Doppler ER1

151,10 €

A22204L263

IN STOCK

Delivery possible on Tuesday November 26

Get 15 Points fidelity3,00 €


Doppler

We also recommend

Description

Reinforced full connecting rod Doppler ER1 for motorized 50cc Derbi Euro3, Euro4

Includes

  • 1 x crankshaft
  • 1 x needle cage

Technical characteristics

  • Generic part
  • Mark: Doppler
  • Product Racing
  • Reinforced crankshaft
  • For engine Derbi Euro3, Euro4
  • Sold with needle cage

In order to obtain an optimal assembly, we advise you to replace bearings and crankshaft seals.

Dimensions

  • Total axle length: 175mm
  • Thread diameter: 10 mm
  • Connecting Rod Inner Diameter: 17mm
  • Needle cage height: 15 mm
  • Outer diameter cage: 17 mm

When assembling the crankshaft Doppler, the needle cage must be adapted to the dimensions of the piston. It is imperative to check that the rating is the same as the original, otherwise your engine will be damaged.

New crankshaft adaptable Doppler for RS, SX, GPR, Senda Xtreme Xrace, DRD, SMT, RCR, SC3 ...

Crankshaft for 50 brand box Doppler have been specially designed to optimize the performance of your 50 cm3 engine. Indeed, they make it possible to obtain better results on the engine speed curves as well in acceleration as in pure speed and agree perfectly with an exhaust racing 50 cm3.

Thanks to their reinforced connecting rods, these linkages will guarantee you an excellent reliability and a great longevity for a daily use.

This article was specially designed to offer you a similar product originally, compatible with your 50 box at the best value for money.

Crankshaft assembly Doppler Nine for motorcycle 50 cm3 with box

Compatible with all motor models Derbi Climb on Aprilia RS RS4, SX, Derbi GPR, Senda Xtreme Xrace, DRD, Gilera SMT, RCR, Speedcool SC3 and SC4 ... According to models

Find all parts in the crankshaft category on our site!

COMPATIBLE MODELS

Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.

50 with box

Aprilia
  • RS 50 2T (2006 - 2010)
  • RS 50 2T (depuis 2018)
  • RS4 50 2T (2011 - 2017)
  • RX 50 2T (2006 - 2010)
  • RX 50 2T (2011 - 2017)
  • RX 50 2T (depuis 2018)
  • SX 50 2T (2006 - 2010)
  • SX 50 2T (2011 - 2017)
  • SX 50 2T (depuis 2018)
  • SX 50 Factory 2T (depuis 2018)
Derbi
  • GPR 50 2T (2006 - 2010)
  • GPR 50 2T (2011 - 2017)
  • GPR Nude 50 2T (2006 - 2010)
  • Senda R DRD Pro 50 2T (2006 - 2014)
  • Senda R DRD X-Treme 50 2T (2011 - 2017)
  • Senda R DRD X-Treme 50 2T (depuis 2018)
  • Senda R DRD racing 50 2T (2006 - 2010)
  • Senda R X-Race, X-Treme 50 2T (2006 - 2010)
  • Senda SM DRD EVO 50 2T (2008 - 2010)
  • Senda SM DRD Pro 50 2T (2006 - 2014)
  • Senda SM DRD X-Treme 2T (2011 - 2017)
  • Senda SM DRD racing 50 2T (2006 - 2010)
  • Senda SM Limited 50 2T (depuis 2018)
  • Senda SM X-Race, X-Treme 50 2T (2006 - 2010)
  • Senda SM Xtreme 50 2T (depuis 2018)
  • Senda SM racing 50 2T (depuis 2018)
Gilera
  • Drifting 50 2T (depuis 2018)
  • RCR 50 2T (2006 - 2010)
  • RCR 50 2T (2011 - 2017)
  • RCR 50 2T (depuis 2018)
  • SMT 50 2T (2006 - 2010)
  • SMT 50 2T (2011 - 2017)
  • SMT 50 2T (depuis 2018)
Nox
  • KLE SM 50 2T (depuis 2010)
  • KLE TT 50 2T (depuis 2010)
Speedcool
  • SC3 SM 50 2T (depuis 2013)
  • SC4 Enduro 50 2T (depuis 2013)
Valenti racing
  • N01 Naked 50 2T (2013 - 2017)
  • N01 Naked 50 2T (depuis 2018)
  • RME Enduro 50 2T (2010 - 2017)
  • RME Enduro 50 2T (depuis 2018)
  • RME Factory 50 2T (2010 - 2017)
  • RME Factory 50 2T (depuis 2018)
  • RME Race 50 2T (2010 - 2017)
  • RME Race 50 2T (depuis 2018)
  • S01 Scrambler 50 2T (2013 - 2017)
  • S01 Scrambler 50 2T (depuis 2018)
  • SM 50 2T (2010 - 2017)
  • SM 50 2T (depuis 2018)

Similar products

Products already seen

HERE 100% OF THE PARTS INDICATED IN STOCK REALLY ARE!