Scrolling indicators and LED rear lights Fifty ProLight black (with flash light)

Pair of dynamic indicators Fifty Pro Light

Set of new right and left direction lights adaptable for motorcycle, moped, scooter, quad, buggy XNUMXcc, XNUMXcc and other displacements. For the proper functioning of your indicators, it is advisable to order two pairs (one pair at the front, one at the rear) and to remove the flashing unit. These sequential turn signals do not need a control unit to work, if you keep the original flasher control unit, the led bar will not work until the end of the turn signal.
To remove your flasher unit, you must shunt/short-circuit a U with the wires of your flasher unit. To make this connection, you must connect the current inlet wire of your control unit with the output wire of this control unit. We have no information regarding the location of your vehicle's flasher unit or the type of connection to your harness. This kit of two flashing lights is adaptable, depending on the model it may be necessary to adapt the fixing and modify the connection lugs to your harness. They can be front or rear mounted.
These scrolling indicators also have the fixed taillight option and the taillight flashing option when braking.

This pair of turn signals includes

• XNUMX x flashing right
• XNUMX x flashing left

Technical characteristics and dimensions of alarms

• Mark: Fifty moto parts
• Type: leds
• XNUMX Volts Power Supply

• Cabochon color: transparent white
• Flashing color: black
• LED color: orange
• Total length of a turn signal: XNUMX mm
• Diameter thread fixing: XNUMX mm
• No threading: XNUMX
• Approved indicators