Professional quality satin varnish with Spray Max hardener XNUMXml

XNUMXK Satin Finish Varnish XNUMXml with SprayMax XNUMXml Hardener

Transparent varnish for all types of protection of new paints or touch-ups on bodywork, mechanical part or cycle part for your motorcycle, scooter, moped, quad or other vehicles.

Technical characteristics of spray varnish

• Brand: Spray Max
• Color: transparent satin
• Capacity: XNUMX milliliters
• Gloss level: XNUMXE (+/- XNUMX)
• Smooth finish, long-lasting shine and no color alteration
• Abrasion and scratch resistance
• Particularly suitable for large areas

Professional quality satin varnish with Spray Max hardener is also available par box of XNUMX bombs.

Tips for using varnish

• Before use, shake the aerosol well for XNUMX min.
• Remove the red striker from the aerosol cap, and place it on the rod located at the base of the aerosol, without tilting it. Place the aerosol with the striker, cap down, on a stable and horizontal support
• Hit the aerosol using regular vertical pressure. An audible click is then emitted. Press once
• Jet immediately erase the red striker in the trash in order to always know which aerosols have already been struck (if you have several aerosols)
• Shake the aerosol well for at least XNUMX min, making sure you hear the sound of the mixing balls
• Perform a spray test and check the product. During the spraying test, observe whether the diffuser sprays cleanly and evenly
• Apply by spraying once or twice, observing an aeration time of XNUMX to XNUMX minutes
• Let dry XNUMX hours at an ambient temperature of XNUMX ° C
• Purge the valve by inverting the aerosol and spraying for a few seconds
• Can be stored XNUMX month at XNUMX ° C from the date of manufacture indicated on the can, once opened, the life of the aerosol is XNUMX hours

Dangerous. Respect the precautions for use. All liquids and chemicals must not come into contact with skin, eyes and must not be ingested. When handling them, protect yourself with personal protective equipment (EPI).
Safety Information: All liquids should be kept out of the reach of children. DANGER, corrosive product. In case of eye contact, flush immediately with plenty of water for XNUMX minutes. If irritation persists, seek medical attention. If swallowed, seek medical advice immediately and show this container or the label.
All products in aerosol form must be kept out of the reach of children. Extremely flammable aerosol. Pressurized container: may burst if heated. May cause damage to organs through prolonged or repeated exposure. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. In case of consultation with a doctor, keep the container or the label available.