Scrolling indicators and LED rear lights Brazoline Black

Pair of rear indicators with universal lights Brazoline

Set of right and left direction lights with new position lights adaptable for motorcycle, moped, scooter, quad, buggy XNUMXcc, XNUMXcc and other displacements. For the proper functioning of your indicators, it is advisable to order two pairs (one pair at the front, one at the rear) and to remove the flashing unit. These sequential turn signals do not need a control unit to work, if you keep the original flasher control unit, the led bar will not work until the end of the turn signal.
To remove your flasher unit, you must shunt / short-circuit make a U with the wires of your flasher unit. To make this connection, you must connect the current inlet wire of your control unit with the output wire of this control unit. We have no information regarding the location of your vehicle's flasher unit or the type of connection to your harness. This kit of two flashing lights is adaptable, depending on the model it may be necessary to adapt the fixing and modify the connection lugs to your harness. These brand rear turn signals Brazoline are dynamic, when you operate the turn signals, the rear position light gives way to the flashing on that side. During our assemblies, we connected the position lights on our turn signals, you can place the brake light instead.

This pair of turn signals includes

• XNUMX x right rear turn signal
• XNUMX x flashing rear left

Technical characteristics and dimensions of alarms

• Mark: Brazoline
• Type: leds
• Power supply: XNUMX volts

• Cabochon color: smoky black
• Flashing color: black
• Total length of a turn signal: XNUMX mm
• Diameter thread fixing: XNUMX mm
• No threading: XNUMX
• Approved indicators