LED scrolling indicators and daytime running lights Brazoline Black

Pair of front turn signals with universal night lights Brazoline

Set of right and left direction lights with daytime running lights new adaptable for motorcycle, moped, scooter, quad, buggy XNUMXcc, XNUMXcc and other displacements. For the proper functioning of your indicators, it is advisable to order two pairs (one pair at the front, one at the rear) and to remove the flashing unit. These sequential turn signals do not need a control unit to work, if you keep the original flasher control unit, the led bar will not work until the end of the turn signal.
To remove your flasher unit, you must shunt/short-circuit a U with the wires of your flasher unit. To make this connection, you must connect the current inlet wire of your control unit with the output wire of this control unit. We have no information regarding the location of your vehicle's flasher unit or the type of connection to your harness. This kit of two flashing lights is adaptable, depending on the model it may be necessary to adapt the fixing and modify the connection lugs to your harness. These front turn signals from the brand Brazoline are dynamic, when you turn the indicators, the front light of this flashing switches off to make room for the flashing on that side.

This pair of turn signals includes

• XNUMX x front right turn signal
• XNUMX x flashing front left

Technical characteristics and dimensions of alarms

• Mark: Brazoline
• Type: leds
• Power supply: XNUMX volts

• Cabochon color: smoky black
• Flashing color: black
• Total length of a turn signal: XNUMX mm
• Diameter thread fixing: XNUMX mm
• No threading: XNUMX
• Approved indicators