The proper functioning and performance of a motorcycle or quad are based on many elements, including the speed selector, which plays a key role in controlling your two-wheeler. It is therefore essential to understand how it works, to know how to maintain it and how to choose it to ensure the optimal performance of your vehicle.

Understanding the role of the gear selector

This is the component that allows you to manually shift gears on your motorcycle or quad. Concretely, it is a lever that you operate with your left foot to change gear. Pushing down shifts into a higher gear, and pushing up shifts the speed.

It is connected to the gearbox par a linkage. When you operate the selector, the movement is transmitted to the gearbox which changes gear. It is therefore fundamental for the performance and safety of your vehicle.

On a motorcycle, the gear shift lever is located to the left of the engine and is operated with your foot. On a motorcycle, neutral is between first gear and second. It is also important not to operate the selector too forcefully. force. Usually a simple press is enough.

A motorcycle or quad is impossible to drive if the selector is completely worn or damaged. Often irreversible, a broken selector must be changed without delay.

Its importance in the operation of a motorcycle or quad

It is crucial for controlling your motorcycle or quad. Mastering gear changes is essential for smooth driving and to fully exploit the potential of your engine. A faulty or incorrectly adjusted gear selector can lead to choppy driving, mechanical failures, and even safety issues.

The different types of this essential element

Motorcycle models

You have two options: original or adaptable?

For motorcycles, they may vary depending on the type and model of the motorcycle. Some models are specifically designed for sport bikes, while others are better suited to road bikes or customs. They can be made of steel, aluminum, or stainless steel to provide optimal strength and durability.

Quad models

For quads, the selector may be different. Some quads have an automatic or semi-automatic gearbox, and therefore do not need a manual gear selector. However, for quads with a manual gearbox, the gear selector is similar to that of motorcycles, but can be adapted to the specific use of the quad.

How to choose your gear selector

Factors to consider when purchasing

When purchasing it, it is important to consider several factors. The first is compatibility with your motorcycle or quad. Make sure the gear selector is correct for the make, model and year of your vehicle.

The manufacturing material is also important. Shifters, usually made of aluminum or stainless steel, generally offer better durability and resistance to harsh driving conditions.

Mistakes to avoid

When purchasing a gear selector, avoid choosing a model that is too cheap. These may be less durable and their durability may be compromised. Additionally, make sure you don't buy one that isn't compatible with your vehicle. This could not only affect the operation of your gearbox, but also cause safety issues.

Installing this item

Installation steps

Installing a shifter generally requires a few basic tools (wrenches, screwdrivers) and a very good manual from the manufacturer. The installation process can vary depending on the type of housing you have, but generally it involves removing the old gear selector, installing the new one and making the necessary adjustments to ensure optimal shifting.

Precautions to take during installation

When installing the selector, it is important to check that all parts are properly aligned and securely attached, to avoid operational problems. It is also crucial to lubricate the gear selector to ensure good mobility and prevent premature wear.

Maintaining your gear selector

Tips for regular maintenance

Proper maintenance of your lever is essential to ensure its longevity and proper operation. It is recommended to regularly check that operation is smooth, that the selector is not too loose or too tight, and that there are no signs of wear or corrosion.

Remember to check your gear selector very regularly to ensure that there are no problems or wear.

Changing your motorcycle gear selector is within everyone's reach, just a few tools and that's it.

If you need to replace your selector, you will find aluminum or rubber selector tips among our selection of gear selectors. We offer several brands like HEBE, KRM, 4MX SCAR ou GENCOD.

Signs of wear and failure

Signs of wear can be subtle, but are usually accompanied by problems shifting gears. Par For example, if you have difficulty shifting gears, if the gear shift is noisy, or if the lever seems loose, these are signs that your gear selector may need to be adjusted or replaced.

- Excessive wear:

You notice significant wear on the gear selector, such as deep grooves, bending, or warping. Excessive wear can make shifting difficult or inaccurate.

- Excessive play:

You notice that there is excessive play in the gear selector, which means there is excessive side to side movement or up and down movement. Play can affect the proper operation of the gear selector.

- A pity :

The gear selector is damaged, due to a fall or impact. Cracks, breaks, or other physical damage can cause the gear selector to fail and make it unsafe to use.

- Operating problems:

You experience problems when changing gears, such as difficulty shifting or unexpected shifts. It is necessary to replace the element to restore normal operation of the gearbox.

Trends and innovations in this field

Manufacturers of motorcycle and quad parts are constantly looking for new methods to improve control and driving comfort. This is reflected in innovations and trends in the field of gear shifters.

Par For example, some manufacturers now offer adjustable gear selectors, which allow the rider to adjust the lever according to their foot size or riding style. There are also gear selectors with a built-in display that shows the current speed, which can be very useful for novice riders or those riding on the racetrack.

Models available from our company

Presentation of our quality models

Our company offers a wide range of gear selectors for motorcycles and quads of all brands. We are committed to offering quality, resistant and durable products to guarantee optimal performance of your vehicle. Whether you are looking for a gear selector for a sports motorcycle, a road bike, a custom or a quad, we have the model you need.

Advantages of our products

Our selectors are designed to meet the needs and expectations of two-wheel enthusiasts. Made from resistant and durable materials, they offer optimal performance and reliability. Additionally, our dedicated customer service is here to help you choose the product that best suits your needs and your vehicle.

In conclusion, it is an essential part of your motorcycle or quad and requires regular attention and maintenance. A good gear selector ensures smooth driving, optimal control and longevity of your vehicle. So don't hesitate to invest in a quality gear selector and ensure that it is properly maintained regularly.

Remember to consult the other categories of kick and gear selector to find all your parts: kick-start , Kick-start parts, selector parts.