Tutorial: Universal or removable paint application

1) Dismantle the fairings and degrease them.

2) Sand lightly so that the paint sticks and then clean to remove dirt. Be careful if you sand your fairing too hard or with too coarse grain you will need to apply several coats of paint to no longer see the scratches.

3) Open the spray can and shake it well.

4) Connect the spray can to the spray gun.

5) Spray on your fairings. Tip: to avoid drips and the `` orange peel '' effect, do not get too close, pull the paint well by spraying it and do not put too much in the same place.

6) To draw the paint well, make large gestures from right to left or from top to bottom.

7) Wait 20 minutes between each coat of paint.

8) The number of layers depends on the state of your fairings.

9) Here is the result of the fairings after 3 layers of paint.

11) For a result and a perfect hold you can varnish over it.

11) To put the removable paint you just need to degrease your surface to be painted. Do not sand it!

11) Mix the spray well before application. Spend minimum 5 coats so that the paint can be removed more easily. Wait 20 minutes between each coat. For a perfect result on dark rims or fairings, it is best to apply a coat of white.

11) To remove the paint just scratch in a corner with a blade.

11) Gently pull it out.

11) With multiple layers, the painting will come in one piece, otherwise you will need more time.