HOW TO LOWER MY MOTORCYCLE DERBI 50?

What if the motorcycle Derbi 50 of your dreams is too high?

It's really not pleasant to ride a motorcycle in fear of falling to a stop. It's not easy either to tell yourself that you'll have to stabilize your bike on tiptoe.

How to save a few precious centimeters on the height of your motorcycle?

There are different solutions to solve this problem and lower your motorcycle to be perfectly comfortable.

First, check the maintenance guide for your Derbi 50, if the rear suspensions are height adjustable.

The Different Ways to Lower Your Boxed Motorcycle Derbi

It is possible to change the shock of all models from 50 to brand box Derbi. Find on 50 Factory full range shock absorbers of all sizes.

2 - Use a lowering kit for Derbi 50

This technique is very reliable and a good alternative to the 1 method. In general, the motorcycle lowering kit consists of changing the suspension link at the rear shock absorber and can save up to 5 cm. The longer the links, the lower the bike will be.

In order to balance the bike once the kit is installed, it is IMPERATIVE to adjust the height of the fork tubes in the triple trees at the front. If you don't do this, the bike will be slumped at the rear, the chassis will be less agile and your headlight will not illuminate the road properly! It is therefore necessary to raise these fork tubes by half par compared to the millimeters gained at the rear. Example: if you gain 50mm in the rear, you have to move the tubes up 25mm.

This solution is the most advantageous car it is fast and economical, non-destructible: any change is reversible if necessary, assembly and disassembly is very simple. However, be sure to check that the lowering kit is suitable for your motorcycle.ar each model has its own kit.

Lowering kits for Derbi 50 ➜

3 - Digging the saddle of your motorcycle Derbi 50

Digging a saddle is an economical solution and will work in some cases, if your saddle allows it! There is no change in the settings of the motorcycle and there will therefore be no impact on the behavior of your two-wheeler. You will be able to earn approximatively between 3 cm and 6 cm, depending on the models. However, to make this modification as cleanly as possible, you will have to go to a saddler. By hollowing out the saddle, your comfort may be altered, in fact the foam present will be less and therefore less comfortable. The insert of a gel can fill this concern but the thickness of the saddle will be raised.

But there again it is preferable to go there with a sense of proportion. Because we are touching here on the sacrosanct footrest/saddle/handlebar triangle which determines the riding position, a factor on which the control and pleasure of your machine largely depend. . Also note that the simple fact of thinning the saddle at the level of the crotch makes it possible to have the legs that touch for those where only a few millimeters are missing.

This process does not lead to any modification in the settings and has no impact on the behavior of your Derbi 50.

4 - Adjust the shock of your Derbi 50

This last solution is tricky car it modifies the behavior of your motorcycle. The principle is to unload the spring to gain a few millimeters at the rear, so the bike will be much more flexible. The advice of a professional before making this type of modification is essential.

Lower your motorcycle Derbi 50 amounts to changing the center of gravity, the ground clearance is reduced.

At the same time, there are handlebar saddles and saddle wedges that allow you to adjust the height of your handlebars.