General information > Tips and Guides > Tutorials > Moped > Cycle parts > Install a side stand on your moped

TUTORIAL TO INSTALL A SIDE STAND

Ce tutorial aims at you help install a side stand of your moped. The example presented here concerns the change of crutch of a Peugeot 103 but the principle remains the same for all other moped models and brands. Remember to check the shape of the swingarm: round, oval or square

HOW TO INSTALL A SIDE STAND

1) Position the kickstand on the swingarm

2) Place a wedge between the clip and the arm (rear part)

3) Then the other on the front.

4) Place the top screw and nut. Tighten using the spanner and the pipe wrench.

5) Then tighten the lower screw and nut. Check that the brake cable is not stuck par the crutch attachment

Many models of side stand are available at 50Factory.

Also discover all our products from the chassis parts of your two wheels

VIDEO: INSTALLING A SIDE STAND

BACK TO ALL TUTOS