Troubleshooting > Failures par brand > VENT > My VENT 50 motorcycle accelerates on its own
My 50cc VENT motorcycle accelerates on its own
Your mà © caboîte 50cc VENT accelerate by itself when you are riding? This can be due to several issues. It is possible that your machine will start to accelerate on its own when you are driving at 60km / hpar example, or when you are just starting out. In most cases this is a problem of accelerator cable. Indeed, the latter can be damaged, it will therefore be necessary to consider its replacement. It may also be a problem with the carburettor.
Does your VENT motorcycle accelerate on its own from the start?
If your VENT motorcycle starts accelerating on its own when starting, it is usually a problem with the carburettor. Here are the different problems you may encounter on your carburetor:
- The bushel does not go down and up correctly, adjust the carburetor.
- Theneedle is too high, also opt for a carburettor setting.
- The idle jet is too big, switch to a smaller one.
- There is an air intake at the carburetor gaskets. Replace them.
- La intake pipe is split, so there is an air intake. Replace it.
- Idling is not good. Set it idle screw on your carburetor (small screw with the spring).
Does your VENT motorbike accelerate by itself when you twist the throttle?
If your VENT motorcycle starts accelerating on its own when you apply pressure to the throttle grip, there is usually a problem with the throttle. of the throttle cable. Here are the different problems you may encounter at this level:
- The gas cable is not tight enough.
- The cable is damaged or frayed. Fix it by cutting it par example or replace it.
- The cable is cut. Replace it completely.
- The cable does not move correctly in the sheath. Put some fat on your cable.
![]()
Cart
This product has been added to your cart
![]()
Cart
You have already added this product to the cart or there is not enough in stock.