General information > Tips and Guides > Tutorials > 50 with box > FAIRING > Change its headlight plate, turn signals and mudguard
Ce tutorial aims at you help change the flagship plaque, turn signals et the front mudguard from your 50 to box thanks to pics and explanations associated. The dismantling / mounting methods are similar depending on the model of your two wheels.
Difficulty :
Temps necessary:
1 time
1) Install the headlight plate fasteners and turn signals.
2) Disassemble your flagship plate.
3) Also dismount your front mudguard.
4) Install your new mudguard.
5) Install lugs on the harness wires and the headlight plate.
6) To mount this halogen headlight plate, gather a wire from each bulb (for ground). To have a low beam bulb and a headlight bulb, put a terminal on each wire.
7) Connect the turn signal and headlight wires (on this model the turn signals have a green / yellow ground wire and pink and purple power supplies. The headlight has a green / yellow ground and the blue and white / yellow code and headlight power supplies).
8) Remember to insulate the terminals with electrician scotch.
9) Attach the headlight plate to the fork tube of the bike.
11) Check that the indicators and the headlight are working properly. Bulb from the top in code, bulb from the bottom headlight.
Many headlight plates are available at 50Factory, the universal flagship, the original type plateand the universal number plate. The installation is relatively simple and quick, however take the time to make the connections. Give a new look to your box 50cc thanks to the flagship plates of different colors! Of halogen are also sold individually. Also find all turn signals suitable for your two-wheel drive at 50factory. Com.