Parts and equipment for motorcycles, quads, scooters and bicycles

General information > Tips and Guides > Tutorials > 50 with box > ENGINE > Change its valves and its intake manifold

TUTORIAL TO CHANGE YOUR CLAPETS ET HIS INLET PIPE

Ce tutorial aims at you help replace your intake valves and pipe of your boxed 50. The example presented here concerns the change of valves and the intake pipe of a Derbi Senda DRD X-Treme. The pieces presented are reed valve block et intake pipe.

HOW TO CHANGE ITS CLAPETS ET HIS INLET PIPE

remove the clamp.

1) Remove the clamp from the carburetor.

change valves and 2 stage intake pipe

2) Remove the oil hose.

change valves and 3 stage intake pipe

3) Remove the heater hoses and seal them.

change valves and 4 stage intake pipe

4) Remove the carburetor sleeve.

change valves and 5 stage intake pipe

5) Remove the carburetor from the intake pipe.

change valves and 6 stage intake pipe

6) Remove the fuel hose.

change valves and 7 stage intake pipe

7) Remove the plug cover and carburetor plug, using the screwdriver.

change valves and 8 stage intake pipe

8) Remove the sleeve and the intake pipe.

change valves and 9 stage intake pipe

9) Remove the valves.

change valves and 10 stage intake pipe

11) Install the new valves.

change valves and 11 stage intake pipe

11) Install the new intake pipe.

change valves and 12 stage intake pipe

11) Install the intake manifold sleeve and tighten the clamp.

change valves and 13 stage intake pipe

11) Put the plug cover and plug back on the carburetor.

change valves and 14 stage intake pipe

11) Replace the fuel hose.

change valves and 15 stage intake pipe

11) Put the carburetor back on the intake pipe.

change valves and 16 stage intake pipe

11) Tighten the hose clamp.

change valves and 17 stage intake pipe

11) Replace the oil hose.

change valves and 18 stage intake pipe

11) Unclog the heater hoses and put them back.

change valves and 19 stage intake pipe

11) Replace the carburetor sleeve and tighten the sleeve clamp.

Changing the intake pipe and valves on your boxed 50cc with engine Derbi Euro 3 is quite simple but requires time and patience.

You will find at 50factory.com all reed valve block et intake pipes for your two-wheelers as well as all engine parts you need !

VIDEO: CHANGING CLAPETS ET INLET PIPE


HERE 100% OF THE PARTS INDICATED IN STOCK REALLY ARE!