My boxed motorcycle CPI Do not start

Checking the battery of your CPI 50

To check, examine the level of the horn or lights, if you have less than force in sound and lighting than usual is that the Battery is involved.

Check the condition of the connectors and the battery. Inspect the condition and tightness of the cables at the starter motor and the battery.

A problem starting your CPI 50 may be related to fouling or corrosion of the terminals. Clean the terminals with a wire brush and check the various contactors and fuses.

Check the charge level of your battery using the intensity of your headlight. A headlight that does not turn on is synonymous with a dead battery. It is then necessary to recharge it with a sacred clothe specific charger.

Check your candle CPI 50

Si the candle of your mà © caboîte CPI 50 is damaged, your motorcycle will not start. In this case, you must replace it. Before fitting a new one, remove the one currently on your machine to choose the correct reference (the model is always written on it, regardless of the spark plug brand). Clean the connectors during the change. It's a simple operation to perform

Find the codification of the different candles as well as Equivalences according to brands directly on our site.

Go for a candle NGK ou Champion in order to obtain the best possible performance.

Checking the carburetor of your CPI 50

There may be dirt in your carburetor, this is a fairly common occurrence that prevents your machine from starting.

You can also get closer to a two-wheeler professional which can pass your carburetor through an ultrasonic machine in order to clean it perfectly.

If the fuel of your CPI 50 is too dirty or damaged it is best to replace it completely. Discover our entire range of carburetors for box.

Control of the gasoline of your CPI 50

Un bad fuel or the fact that water may have entered the tank may possibly prevent the motorcycle from starting.

Checking if the gasoline is mixed with water is a simple task, you just need to remove a small amount from the deposit and see if there are any small ones. bubbles, indicating that the water has indeed reached the fuel.

In this case it is recommended to drain your CPI 50 and put in new gasoline. You can follow our tutorials in order to carry out the emptying of your 50 motorcycle.

Checking your air filter CPI 50

The fact that the your air filter CPI 50 be dirty may be another reason why your motorcycle does not start.

The function of this part is to ensure that only clean air enters the engine. If it receives dust, sand or other elements, it could disturb the start-up.

On a CPI 50 removing the air cleaner is fairly simple (as on most canned 50ccs), just remove a fairing. Then run the filter through a blower or under water (wait for it to dry) then reinstall it. If it is cracked, replace your air filter.