Crown 50 teeth aluminum 520 TM EN 125, 250, MX 450... Supersprox black

Rear sprocket 50 teeth Supersprox black TM Enduro 125, EN 250, MX 300...

Transmission tray par new chain adaptable for motorcycle cross, enduro 125cc, 144cc and other displacements TM Enduro, EN, MX ...

Technical characteristics of the crown

• Mark: Supersprox
• Drive train type: 520
• Number of teeth: 50
• Material: aluminium
• Colour: black
• Number of fixing holes: 9
• Type of mounting holes: countersunk

Dimensions of the rear pinion (see marks on the typical drawing)

• A - Fixing center distance: 42 mm
• B - Fixing center distance: 80 mm
• C - Fixing center distance: 107 mm
• D - Fixing center distance: 122 mm
• E - Diameter of the mounting holes: 8 mm
• F - Inner diameter of the crown: 105 mm

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6 mm, center distance 12.7 mm) but some 50s and most 125s use the 428 (width 7 mm, center distance 12.7 mm) even for 125 in 520 (width 6 mm, center distance 15.8 mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.