Cylinder stud Piaggio Zip, Typhoon, MBK Booster...

Cylinder stud Piaggio Zip, Typhoon, MBK Booster...

3,50 €

S55934G989

IN STOCK

Delivery possible from Friday 10 January


Piaggio

We also recommend

Description

Cylinder stud Piaggio Typhoon, Zip, MBK Booster...

Brand new original high mounting stud for scooter 50cc Piaggio Zip, Typhoon, MBK Booster... Also remember to replace your cylinder head clamping nuts if you are replacing a damaged stud. Advice: if your old stud does not loosen from the housing and remains blocked, you can use the principle of the counter nut by putting two nuts on top of each other, the bottom one being used to forcer with a key to extract the stud without risk of damage.

Technical characteristics and dimensions of the crankcase screw

  • Mark: Piaggio
  • Manufacturer Part Number: 1A003633R
  • Material: steel
  • Colour: grey
  • Total Stud Length: 106mm
  • Threaded length at the ends: 22 mm
  • Stud Diameter: 6 mm
  • Diameter of the threads: 6 mm
  • No threads: 1.00
  • Sold individually

COMPATIBLE MODELS

Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.

  • Typhoon 50 2T (from 2018)
  • Zip 50 2T (1991 to 1994)
  • Zip 50 2T (from 2000)
  • Zip 50 2T 1995 (rear brake disc)
  • Zip 50 2T 1995 (rear drum brake)
  • Zip 50 2T Fast Rider (1996 to 1999)
  • Zip 50 2T RST (In 1996 1998)
  • Zip 50 2T SP1 Liquid (1996 to 2000)
  • Zip 50 2T SP2 liquid (since 2001)
  • Bw's 50 2T 12p (since 2008)
  • Bw's Easy 50 2 (since 2013)
  • Bw's Ng 50 2 (1996 to 2004)
  • Bw's Ng 50 2 (since 2004)
  • Bw's Original 50 2 (1992 to 1994)
  • Bw's Original 50 2 (1995 to 2003)
  • Bw's Original 50 2 (from 2004)
  • Slider 50 2T (2000 to 2004)
  • Slider Naked 50 2T (from 2005)

Products already seen

100% of products shown as in stock actually are!