No need to contact us regarding the availability of an out of stock product reference , we are already doing the necessary with our suppliers to have it as soon as possible. For information 90% of references out of stock will be available again within a period of one to three weeks.
Note that to ensure rapid delivery of all our references, it is not possible to validate an order on the site for a product that is out of stock.
Of course concerning the products indicated "In stock", these are available immediately.
Transmission tray par new chain adaptable for motorcycle 50cc Derbi Senda SM, Gilera SMT before 2010, Derbi Senda R et Gilera RCR since 2000, Rieju MRT, Yamaha DT ...
Technical characteristics of the crown
Mark: Afam
Manufacturer Part Number: 47103-60
Drive train type: 420
Number of teeth: 60
Material: steel
Colour: grey
Number of fixing holes: 6
Type of mounting holes: smooth
Dimensions of the rear pinion (see marks on the typical drawing)
A - Fixing center distance: 80 mm
B - Fixing center distance: 43 mm
C - Fixing center distance: 123 mm
D - Fixing center distance: 118 mm
E - Diameter of the mounting holes: 8 mm
F - Inner diameter of the crown: 105 mm
It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6 mm, center distance 12.7 mm) but some 50s and most 125s use the 428 (width 7 mm, center distance 12.7 mm) even for 125 in 520 (width 6 mm, center distance 15.8 mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.
COMPATIBLE MODELS
Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.