Front brake caliper offset dropout Ø300 mm Derbi DRD SM Limited, Gilera Drifting... (since 2018) Fifty

Front brake caliper dropout xNUMXmm Derbi DRD SM Limited, Gilera Drifting... (since 2018) Fifty

21,50 €

A22345H257

IN STOCK

Delivery possible from Tuesday 11 February

Get 2 Points fidelity0,40 €


Fifty moto parts

We also recommend

Description

Front brake disc adapter Fifty Derbi DRD SM Limited, Gilera Drifting ...

New front brake caliper mounting bracket adaptable for 50cc motorcycle Derbi DRD SM Limited, Gilera Drifting, Aprilia... from 2018.
This offset bracket allows you to go from an original 260mm diameter front brake disc to a 300mm diameter disc while keeping the original brake caliper.
For this assembly, you must have a original inverted fork from Derbi SM Limited ou Gilera Drifting (after 2018), an type brake disc Aprilia RS4 From 300mm, order two fixing screw for this offset bracket And two fixing screws for the caliper. Consider ordering thread lock for mounting your screws. Installation not homologated on public roads.
We equipped our prototype with this assembly, for an original type spirit we repainted the leg with black paint.

Technical characteristics and dimensions of the front brake caliper support

  • Mark: Fifty moto parts
  • Material: steel
  • Colour: grey
  • Total length of the dropout: 122mm
  • Dropout Thickness: 6mm
  • Bracket fixing center distance: 66 mm
  • Diameter threads: 8 mm
  • No threads: 1.25
  • Brake caliper mounting distance: 59 mm
  • Diameter mounting holes (brake caliper screws): 8 mm

COMPATIBLE MODELS

Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.

  • SX 50 2T (from 2018)
  • Senda SM Limited 50 2T (from 2018)
  • Senda SM Xtreme 50 2T (from 2018)
  • Senda SM racing 50 2T (from 2018)
  • Drifting 50 2T (since 2018)
  • SMT 50 2T (from 2018)

Products already seen

100% of products shown as in stock actually are!