Delivery possible from Tuesday 4 February
Delivery possible from Tuesday 4 February
Delivery possible on Thursday 6 February
Valve box and Ø21 mm intake pipe Peugeot 103 SP, MVL... Malossi
We also recommend
Description
21 mm reed valve box and intake manifold Malossi Peugeot 103 SP, MVL...
New intake housing and carburetor fitting adaptable for moped, moped 50cc Peugeot 103 SP, MVL... The valves fit between the intake pipe and the crankcase. When the engine is difficult to start, it may be necessary to replace them.
Includes
- 1 x Inlet valves
- 1 x intake pipe
- 1 x Inlet Wedge
- 3 x valve seals
- 2 x screws Ø5x11 mm
- 4 x screws Ø5x16 mm
- 2 x screws Ø5x20 mm
Technical characteristics and dimensions
- Mark: Malossi
- Manufacturer no .: 205039
- Slat material: carbon
- Valve material: plastic
- Inner diameter fixing holes: 5 mm
- Fixing centers: 15 mm and 36 mm
- Overall height: 38 mm
- Material of intake pipe: aluminum
- Inner diameter fixing holes: 5 mm
- Fixing centers: 15 mm and 36 mm
- Inner width crankcase side: 26 mm
- Outer Diameter Carburetor Side: 24mm
- Inner diameter carburettor side: 19 mm
- Material of the intake block: aluminum
- Inner diameter fixing holes: 5 mm
- Fixing centers: 36 mm and 39 mm
COMPATIBLE MODELS
Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.
- 103 2T
- 103 Arizona 2T
- 103 CRX 2T
- 103 Chrono 2T
- 103 Excalibur 2T
- 103 HP 2T
- 103 HP2 2T
- 103 HPL 2T
- 103 HRO 2T
- 103 Indiana 2T
- 103 L 2T
- 103 L2 2T
- 103 LS 2T
- 103 LVS 2T
- 103 Land 2T
- 103 ML 2T
- 103 MV 2T
- 103 MVL 2T
- 103 Pro 2T
- 103 S 2T
- 103 SP 2T
- 103 Turbo 16 2T
- 103 V 2T
- 103 VS 2T
- 103 Vogue 2T
- 103 Z 2T
- 103 racing 2T
- 104 2T
- 105 2T
- GL10 2T
- GT10 2T
Products already seen
-
IN STOCK64,10 €
![]()
Cart
This product has been added to your cart
![]()
Cart
You have already added this product to the cart or there is not enough in stock.