Delivery possible from Friday 10 January
Delivery possible from Friday 10 January
Delivery possible from Monday 13 January
Cylinder Studs 7x112.5 mm Peugeot 103 Malossi
We also recommend
-
-
-
-
-
-
-
1,50 € -
0,10 €
Description
Cylinder studs Malossi Peugeot 103
New high engine mounting studs adaptable for mopeds, 50cc mopeds Peugeot 103. Also consider replacing your cylinder head tightening nutse if you are replacing a damaged stud. Advice: if your old stud does not loosen from the crankcase and remains stuck, you can use the locknut principle by putting two nuts on top of each other, the bottom one being used to forcer with a key to extract the stud without risk of damage.
Technical characteristics and dimensions of crankcase screws
- Mark: Malossi
- Manufacturer reference: 19Q
- Total length of the studs: 112.5 mm
- Threaded End Lengths: 14mm and 21mm
- Stud diameter: 7 mm
- Diameter of the threads: 7 mm
- No threads: 1.00
COMPATIBLE MODELS
Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.
- 103 2T
- 103 Arizona 2T
- 103 CRX 2T
- 103 Chrono 2T
- 103 Excalibur 2T
- 103 HP 2T
- 103 HP2 2T
- 103 HPL 2T
- 103 HRO 2T
- 103 Indiana 2T
- 103 L 2T
- 103 L2 2T
- 103 LS 2T
- 103 LVS 2T
- 103 Land 2T
- 103 ML 2T
- 103 MV 2T
- 103 MVL 2T
- 103 Pro 2T
- 103 S 2T
- 103 SP 2T
- 103 Turbo 16 2T
- 103 V 2T
- 103 VS 2T
- 103 Vogue 2T
- 103 Z 2T
- 103 racing 2T
- GL10 2T
- GT10 2T
- TLX 2
- TSA 2
- TSE 2T
Products already seen
-
IN STOCK15,70 €
![]()
Cart
This product has been added to your cart
![]()
Cart
You have already added this product to the cart or there is not enough in stock.