Crown 48 steel teeth 520 Honda CRF, XR 250, 600... Sunstar gray

Crown 48 teeth 520 Sunstar gray Honda CR-F, XR... 250 and 600

Transmission tray par new chain adaptable for motorcycle cross, 250cc and 600cc enduro Honda CR F, XR...

Technical characteristics of the crown

• Mark: Sunstar
• Drive train type: 520
• Number of teeth: 48
• Material: steel
• Colour: grey
• Number of fixing holes: 6
• Type of mounting holes: shouldered

Dimensions of the rear pinion (see marks on the typical drawing)

• A - Fixing center distance: 76 mm
• B - Fixing center distance: 132 mm
• C - Fixing center distance: 153 mm
• D - Diameter of fixing holes: 10 mm
• E - Inner diameter of the crown: 125 mm

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6 mm, center distance 12.7 mm) but some 50s and most 125s use the 428 (width 7 mm, center distance 12.7 mm) even for 125 in 520 (width 6 mm, center distance 15.8 mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.