Primaire of transparent plastic adhesion Spray Max 400ml (box of 6)

SprayMax 400ml plastic adhesion primer cans

Universal primer to prepare the paint for your plastic motorcycle, scooter, moped, quad or other vehicle fairings.

Technical characteristics of a spray primer bomb

• Brand: Spray Max
• Color: transparent (with slightly silver pigmentations)
• Capacity: 400ml
• A fine, even spray is sufficient
• Exceptional adhesion properties
• Very fast drying
• Can be recoated after 10 minutes
• Very good elasticity

Spray Max transparent plastic adhesion primer is also available per unit (400ml bomb)

Tips for using adhesion primer

• It is preferable to disassemble the part to be painted, to clean it thoroughly, to eliminate rust and to sand it with the appropriate paper according to the material.
• Shake the aerosol for 2 minutes.
• In an ambient temperature of 15 to 20°C apply a thin and even layer, from a spraying distance of about 25 cm, until the desired quality is achieved.
• After use, turn the bomb over to empty the air, pressing the valve.

Dangerous. Respect the precautions for use. All liquids and chemicals must not come into contact with skin, eyes and must not be ingested. When handling them, protect yourself with personal protective equipment (EPI).
Safety Information: All liquids should be kept out of the reach of children. DANGER, corrosive product. In case of eye contact, flush immediately with plenty of water for 10 minutes. If irritation persists, seek medical attention. If swallowed, seek medical advice immediately and show this container or the label.
All products in aerosol form must be kept out of the reach of children. Extremely flammable aerosol. Pressurized container: may burst if heated. May cause damage to organs through prolonged or repeated exposure. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. In case of consultation with a doctor, keep the container or the label available.