Electrical harness Peugeot 103 SPX (ph1), RCX (ph1), Clip... identical to original (5-wire output) Restone

Electrical harness Restone Peugeot 103 SPX, RCX, Clip... 5-wire output, original white plug

Complete new wiring adaptable for moped, 50cc moped Peugeot 103 SPX, RCX, Clip ...
The original connector for the ignition output must be replaced par the new female connector supplied, taking care to match the colours of the original wires.

Technical characteristics and dimensions of the electrical cable assembly

• Mark: Restone
• Total length of the beam: 2025 mm
• Total number of pins: 26
• Ignition output: 1 x 4-pin terminal (blue, brown, green, green/yellow) and 1 x terminal (pink)
• High voltage coil: 1 terminal (green/yellow), 1 terminal (black)
• Frame ground: 1 round terminal (green/yellow)
• CDI box: 1 x 4-pin terminal (pink, blue, green/yellow and black)
• Horn: 1 lug (brown)
• Brake switches: 2 terminals (brown and black)
• Rear light: 3 terminals (gray (+), yellow (-) and black (brake switch power supply))
• Transformer: 4 terminals (2 green (+ front light and ignition output), yellow/green (ground) and gray (+ rear light))
• Lighthouse: 2 terminals (green (+) and green/yellow (-))

For the headlight, the green wire is to be connected with the blue wire of the original type switch C52012F524, from this comes the red wire which becomes the power supply for the headlight, the brown wire is to be connected to the horn.

Restone is a French brand specializing in the design of spare parts for two-wheelers. To discover our range of products Restone, click on this link.