Clutch type AM6 Minarelli complete Fifty

Complete engine type clutch AM6 minarelli

New clutch adaptable for motorcycle 50cc Generic, Ride, KSR ... with motor type AM6 Minarelli without modifications. Reference adaptable to all engines AM6 Minarelli with modifications to the pressure plate and the clutch rod.

Includes

• 1 x clutch bell
• 1 x clutch nuts
• 1 x pressure plate
• 4 x pressure screw
• 4 x spring
• 4 x friction plates
• 3 x steels
• 1 x central nut
• 1 x link ball
• 1 x connecting rod
• 1 x clutch hub washer
• 1 x clutch underclutch washer
• 1 x washer block nut

Technical characteristics and dimensions

• Mark: Fifty moto parts
• Model identical to the original type engines AM6
• Inside diameter bell: 17 mm
• Oblique cut bell teeth (original AM6) except Beta Factory
• Delivered without central clutch push rod (not identical to the original AM6 minarelli)

The installation of this typical clutch kit AM6 Minarelli requires disassembling your engine, and more specifically your clutch housing. We advise you to watch the video tutorial below to guide you through the different steps of replacing your clutch. The pressure plate of this clutch has no thread.

Assembly advice: You will need several tools to perform this repair, such as a clutch key AM6, BTR keys, flat keys, needle-nose pliers... Do not forget to bring a can box oil that you put between each disc.

Find on our site all the clutch parts of your 50cc motorcycle equipped with a standard engine AM6.

Attention: This clutch is mounted originally on motorcycles with an engine Type AM6 (copy of engines AM6 Minarelli). If you want to install it on an engine AM6 Minarelli you will have to make some modifications like adding the clutch push rod which is not in this kit par example.