Rear brake disc Derbi DRD Xtreme, Gilera SMT, Aprilia... Ø218 mm

Rear brake disc Derbi DRD Xtreme, Gilera SMT, Aprilia...

New rear brake pad adaptable for motorcycle 50cc, 125cc Derbi Senda DRD, Gilera SMT, Aprilia, Peugeot...

It is essential to make sure of the type of disc you need before ordering by checking its dimensions. The outside diameter of some brake discs may differ from the original assembly, a dropout (adapter) must then be added in this case. It is also necessary to replace your brake pads when changing the disc. Also remember to put a drop of "thread lock" type glue on the disc screws to prevent them from loosening.

Disc technical characteristics and dimensions

• Mark: Derbi
• Manufacturer no .: 866115
• Material: steel
• Disc Outer Diameter: 218mm
• Number of fixing holes: 6
• Diameter of fixing holes: 6 mm
• Mounting for flat head screws
• Fixing centers: 40 mm, 70 mm and 80 mm
• Disc Thickness: 3.5 mm
• Disk dimensions shown on the diagram

More details about the 50 motorcycle rear brake disc Derbi DRD Xtreme, Gilera SMT, Aprilia...

The brake disc is very important on your two wheels, it guarantees your safety with good braking. The standard thickness of a brake disc is between 4 mm and 4.5 mm. It is recommended to change it when the brake discs of the motorcycle reach 3 mm thickness. The manufacturers also recommend replacing the brake discs when they show signs of damage.races excessive wear.

Find on our site a wide range of brake disc for your vehicle as well as all games of brake pads.

Find below the tutorial that will help you change your brake disc.