LED turn signals Fifty ProLight scrolling

Pair of dynamic indicators Fifty ProLight

Set of new right and left direction lights adaptable for motorcycle, moped, scooter, quad, buggy 50cc, 125cc and other displacements. For the proper functioning of your indicators, it is advisable to order two pairs (one pair at the front, one at the rear) and to remove the flashing unit. These sequential turn signals do not need a control unit to work, if you keep the original flasher control unit, the led bar will not work until the end of the turn signal.
To remove your flasher unit, you must shunt/short-circuit a U with the wires of your flasher unit. To make this connection, you must connect the current inlet wire of your control unit with the output wire of this control unit. We have no information regarding the location of your vehicle's flasher unit or the type of connection to your harness. This kit of two flashing lights is adaptable, depending on the model it may be necessary to adapt the fixing and modify the connection lugs to your harness. They can be front or rear mounted.

This pair of turn signals includes

• 1 x flashing right
• 1 x flashing left

Technical characteristics and dimensions of alarms

• Mark: Fifty moto parts
• Type: leds
• 12 volts power supply

• Cabochon color: transparent white
• Flashing color: black
• LED color: orange
• Total length of a turn signal: 106 mm
• Diameter thread fixing: 10 mm
• Approved indicators

Find our range of led turn signals on our site.

Find below the tutorial that will help you change your indicators.