DOT Brake Fluid 3 & 4 Motul Brake Fluid 500ml

Motul DOT Brake Fluid 3 & 4 Brake Fluid 500ml

Oil can for the hydraulic braking circuit of your motorcycle, scooter, moped or quad. This brake fluid is adapted to the entire brake system composed of the front and rear master cylinder and brake lines of conventional or aviation braided steel type.

It is advisable to replace the fluid present in the circuit annually to maintain braking efficiency. When replacing it, be sure to wipe off any liquid that may have spilled outside it.ar it will be corrosive to other parts of your vehicle.

Technical characteristics of the brake fluid

• Brand: Motul
• Model: DOT 3 & DOT4
• Capacity: 500ml

Motul Specifications:

100% Synthetic fluid for all hydraulic brake and clutch control systems meeting the manufacturer's DOT 4 and DOT 3 recommendations. Miscible with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products. Boiling point, dry 245 ° C. Wet boiling point 158 ° C.

The Motul datasheet is available for download below.

Dangerous. Respect the precautions for use. All liquids and chemicals must not come into contact with skin, eyes and must not be ingested. When handling them, protect yourself with personal protective equipment (EPI).
Safety Information: All liquids should be kept out of the reach of children. DANGER, corrosive product. In case of eye contact, flush immediately with plenty of water for 10 minutes. If irritation persists, seek medical attention. If swallowed, seek medical advice immediately and show this container or the label.
All products in aerosol form must be kept out of the reach of children. Extremely flammable aerosol. Pressurized container: may burst if heated. May cause damage to organs through prolonged or repeated exposure. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. In case of consultation with a doctor, keep the container or the label available.