Belton signal blue paint

Belton Signal Blue Spray Paint

Universal aerosol paint to give color to your fairings, motorcycle rims, scooter, moped or quad.

Technical characteristics of spray paint

• Brand: Belton
• Color: signal blue RAL
• Capacity: 400ml

Tips for using paint

• It is preferable to disassemble the part to be painted, to clean it thoroughly, to eliminate rust and to sand it with the appropriate paper according to the material.
• Shake the aerosol for 2 minutes.
• In an ambient temperature of 15 to 20 ° make several layers (2 see 3 are sufficient) par sails of paint in crosses, at a spray distance of about 25 cm, until the desired quality is obtained.
• After use, turn the bomb over to empty the air, pressing the valve.
• Allow the part to rest for 24 h to ensure good curing of the paint.

Dangerous. Respect the precautions for use. All liquids and chemicals must not come into contact with skin, eyes and must not be ingested. When handling them, protect yourself with personal protective equipment (EPI).
Safety Information: All liquids should be kept out of the reach of children. DANGER, corrosive product. In case of eye contact, flush immediately with plenty of water for 10 minutes. If irritation persists, seek medical attention. If swallowed, seek medical advice immediately and show this container or the label.
All products in aerosol form must be kept out of the reach of children. Extremely flammable aerosol. Pressurized container: may burst if heated. May cause damage to organs through prolonged or repeated exposure. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. In case of consultation with a doctor, keep the container or the label available.