Rear sprocket 63 teeth steel 428 Beta RR 50, RE 125... Afam gray

63 crown teeth 428 Afam Beta RR, RE 50, 125â € ¦

Transmission tray par new chain adaptable for motorcycle 50cc and 125cc Beta RR Enduro 50, RR Motard Sport 50, Beta RE 125, RR 125, RR Biker 125.

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 38200-63
• Drive train type: 428
• Number of teeth: 63
• Material: steel
• Colour : grey
• Number of fixing holes: 4
• Diameter of fixing holes: 8 mm
• Crown Fixing Hole Type: Smooth
• Fixing centers: 85 mm and 120 mm
• Inner diameter of the crown: 100 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

applications:

BETA RE Enduro (2009 - 2016)

BETA RR 125 Enduro (2009 - 2020)

BETA RR 125 Biker (2008 - 2020)

BETA RR 50 Enduro (2006 - 2017)

BETA RR 50 Enduro Factory (2012 - 2017)

BETA RR 50 Enduro Regular (2015)

BETA RR 50 Enduro Sports (2015 - 2017)

BETA RR 50 Enduro Standard (2009 - 2014)

BETA RR 50 Biker (2005 - 2017)

BETA RR 50 Normal Biker (2015)

BETA RR 50 Sport Biker (2014 - 2017)

BETA RR 50 Standard Biker (2009 - 2014)

BETA RR 50 Standard (2005 - 2008)