Rear sprocket 54 steel teeth 428 Husqvarna SM, TE 125 ... Afam

54 crown teeth 428 Afam Husqvarna SM, TE 125 ...

Transmission tray par new chain adaptable for motorcycle 125cc Husqvarna SM et TE from 2012 to 2013. This crown is compatible with Fantic XM, Fantic). Countersunk head screws will need to be installed for mounting this crown.

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 14205-54
• Drive train type: 428
• Number of teeth: 54
• Material: steel
• Colour : grey
• Number of fixing holes: 6
• Diameter of fixing holes: 8 mm
• Type of crown mounting holes: countersunk
• Fixing centers: 78 mm and 155 mm
• Inner diameter of the crown: 136 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.