Rear sprocket 49 aluminum teeth 520 Sherco SE-R 125, 300, SEF 450 R, Husqvarna CR 125, WR 250 ... Afam gray

Rear sprocket 49 teeth Afam Sherco SE-R 125, 300, SEF 450 R, Husqvarna CR 125, WR 250 ...

Transmission tray par new chain adaptable for Sherco SE-R 125, 300, SEF 450 R, Husqvarna CR 125, WR 250 ...

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 15206N-49
• Drive train type: 520
• Number of teeth: 49
• Material: aluminium
• Colour : grey
• Number of fixing holes: 6
• Diameter of fixing holes: 8 mm
• Type of crown mounting holes: countersunk
• Fixing centers: 79 mm and 155 mm
• Inner diameter of the crown: 136 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

Applications:

BETA
RR 250 2005 - 2009
RR 4T ENDURO 350 2011 - 2012
RR 4T ENDURO 400 2005 - 2012
RR 4T ENDURO 450 2005 - 2012
RR 4 ENDURO 498 2012
RR 4T ENDURO 520 2010 - 2011
RR 4T ENDURO 525 2005 - 2009

CAGIVA
WMX 125 1989 - 1992
WMX 250 1989 - 1992

GAS GAS
EC 125 2000 - 2011
EC RACING 125 2013 - 2015
EC 200 2000 - 2018
EC 250 2000 - 2010
EC 2T 250 2011 - 2015
EC 2T 250 2012 - 2018
EC 4T 250 2011 - 2015
MC 250 2001 - 2010
XC 250 2018
EC 300 2000 - 2012
EC 2T 300 2013 - 2018
MC 300 2001 - 2010
XC 300 2018
FSE 400 2002
FSE 450 2000 - 2005