Rear sprocket 51 steel teeth 428 Honda CBR, CB 125 F, Bullit 125 ... Afam

Rear sprocket 51 teeth Afam Honda CBR, CB 125 F, Bullit 125 ...

Transmission tray par new chain adaptable for motorcycle 125cc Bulli Hero, Hunt S, Spirit, Honda CB 125 F and CBR.

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 10236-51
• Drive train type: 428
• Number of teeth: 51
• Material: steel
• Colour : grey
• Number of fixing holes: 4
• Diameter of fixing holes: 10 mm
• Crown Fixing Hole Type: Smooth
• Fixing centers: 64 mm and 90 mm
• Inner diameter of the crown: 58 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

applications:

BULLIT 125 Hunt S (2017 - 2018)

BULLIT Spirit (2017 - 2018)

HONDA CB 125

HONDA CBR 125R (2012 - 2016)

HONDA CBR 125RW (2011)

HONDA PCX 150 WW150EX (2019)