Gopart colorless varnish

Clear Gopart varnish spray

Universal aerosol varnish after painting to give shine to the paint of your fairings, motorcycle rims, scooter, moped or quad.

Technical characteristics of spray varnish

• Brand: Gopart
• Appearance: transparent
• Capacity: 400 milliliters

Tips for using the paint

• It is better to disassemble the piece to be varnished, to clean it thoroughly.
• Shake the aerosol for 2 minutes.
• In an ambient temperature of 15 to 20 ° make several layers (2 see 3 are sufficient) par sails of paint in crosses, at a spray distance of about 25 cm, until the desired quality is obtained.
• After use, turn the bomb over to empty the air, pressing the valve.
• Allow the part to rest for 24 h to ensure good curing of the paint.

For more precision when applying paint it is advisable to use the spray gun handle (ref. OU295) for aerosol for sale on our website.

Dangerous. Respect the precautions for use. All liquids and chemicals must not come into contact with skin, eyes and must not be ingested. When handling them, protect yourself with personal protective equipment (EPI).
Safety Information: All liquids should be kept out of the reach of children. DANGER, corrosive product. In case of eye contact, flush immediately with plenty of water for 10 minutes. If irritation persists, seek medical attention. If swallowed, seek medical advice immediately and show this container or the label.
All products in aerosol form must be kept out of the reach of children. Extremely flammable aerosol. Pressurized container: may burst if heated. May cause damage to organs through prolonged or repeated exposure. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. May be fatal if swallowed and enters airways. In case of consultation with a doctor, keep the container or the label available.