Rear sprocket 37 steel teeth 520 KTM SX, XC, 450, 505 and 525 Afam

Rear sprocket 37 teeth Afam KTM SX, XC, 450, 505 and 525

Transmission tray par new chain adaptable for quad 450cc, 505cc, 525cc KTM SX and XC.

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 71305-37
• Drive train type: 520
• Number of teeth: 37
• Material: steel
• Colour : grey
• Number of fixing holes: 4
• Diameter of fixing holes: 10 mm
• Type of crown mounting holes: countersunk
• Fixing centers: 94 mm and 132 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.