Crown 38 steel teeth 520 TGB Target 325, Kymco Maxxer, MXU, KXR 250, 300 Afam

Rear sprocket 38 teeth Afam TGB Target 325, Kymco Maxxer, MXU, KXR 250 and 300

Transmission tray par new chain adaptable for quad Kymco Maxxer 250cc, 300cc from 2006 to 2016, KXR 250cc from 2004 to 2007, MXU 250cc from 2004 to 2013, SMC Jumbo 300cc and TGB Target 325cc from 2009 to 2012.

Technical characteristics of the crown

• Mark: Afam
• Manufacturer Part Number: 74300-38
• Drive train type: 520
• Number of teeth: 38
• Material: steel
• Colour: black
• Number of fixing holes: 4
• Type of mounting holes: smooth

Dimensions of the rear pinion (see marks on the typical drawing)

• A - Fixing center distance: 93 mm
• B - Fixing center distance: 131 mm
• C - Diameter of fixing holes: 10 mm
• D - Inner diameter of the crown: 112 mm

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (6mm width, 12.7mm pitch) but some 50s and most 125s use the 428 (7mm width, 12.7mm pitch) even for 125 in 520 (6mm width, 15.8mm pitch). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.