Rear sprocket 40 teeth steel 520 Polaris Xplorer 300, Trailboss 325, Scrambler 500 ... Afam

Rear sprocket 40 teeth Afam Polaris Xplorer 300, Trailboss 325, Scrambler 500 ...

Transmission tray par chain new adaptable for quad 250cc, 300cc, 325cc, 400cc, 500cc Polaris Big Boss, Scrambler, Sportsman, Trail blazer, Trail Boss and Xplorer.

Technical characteristics and dimensions of the rear toothed pinion

• Mark: Afam
• Manufacturer Part Number: 98300-40
• Drive train type: 520
• Number of teeth: 40
• Material: steel
• Black color
• Number of fixing holes: 6
• Diameter of fixing holes: 10 mm
• Crown Fixing Hole Type: Smooth
• Fixing centers: 52 mm and 104 mm
• Inner diameter of the crown: 80 mm
• Rear sprocket dimensions shown on the diagram

It is essential that you you check the type of drive train you need before ordering. On small motorcycles, most 50cc use the 420 (width 6mm, center distance 12.7mm) but some 50s and most 125s use the 428 (width 7mm, center distance 12.7mm) even for 125 in 520 (width 6mm, center distance 15.8mm). All drive train parts, i.e. front sprocket, chain and rear sprocket, absolutely must be of the same type.

Applications:

POLARIS 250 Trail Blazer (1992 - 2006)
POLARIS 250 Trail Blazer FreeDom (2001 - 2004)
POLARIS 250 Trail Boss (1991 - 2003)
POLARIS 300 Xplorer (1996 - 2000)
POLARIS 300 Xpress (1998 - 2000)
POLARIS 300 Xpress L (1996 - 1997)
POLARIS 325 Trail Boss (2000 - 2002)
POLARIS 330 Trail Blazer (2008 - 2012)
POLARIS 330 Trail Boss (2003 - 2010)
POLARIS 400 L Sport (1994 - 1999)
POLARIS 400 Scrambler (1998 - 2002)
POLARIS 400 Trail Blazers (2003)
POLARIS 500 Scrambler (2000 - 2011)
POLARIS 500 Sportsman (2001 - 2008)