Rear lowering kit Derbi Senda, Gilera SMT, RCR, Aprilia SX RX (-4cm) Fifty

Lowering kit (-4cm) Fifty Derbi Senda, Gilera SMT, RCR, Aprilia SX, RX

New adaptable lowering kit for 50cc motorcycle Derbi Senda, Gilera SMT, RCR, Aprilia RX, SX. If you are too small (or small) to put your foot on the ground when you are stopped then this kit is for you. It lowers your motorcycle Derbi, Gilera et Aprilia easily and reliably. Easy assembly, without modifications of the swingarm or the shock absorber. Exclusively at 50 Factory.

Includes

• 4 x washers
• 2 x medium aluminum spacers
• 2 x aluminum short spacers
• 1 x long aluminum spacer
• 2 x axes
• 2 x brake nuts
• 2 x thick painted steel plates

Technical characteristics and dimensions

• Mark: Fifty moto parts
• Attaches to the shock absorber
• Mounts only on swingarm made of steel and not aluminum
• To lower your bike 4cm at the saddle
• No threading of the 1.75 axis
• Length of the plate: 75mm
• Plate width: 42 mm
• Inner diameter of fixing holes: 12 mm
• On some models it will be necessary to slightly cut the rear fender (cutter)
• In addition to the brake nut, we also recommend dropping a drop of threadlock on the axles in order to prolong the life of the kit over time and thus avoid any play in the plates.