Rear transmission platear new chain adaptable for moped, moped 50cc Peugeot 103.
Technical characteristics and dimensions of the mob sprocket
Brand: Charvin Industries
Drive train type: 415
Number of teeth: 56
Colour : grey
Number of fixing holes: 10
Diameter of fixing holes: 6 mm
Crown Fixing Hole Type: Smooth
Fixing centers: 53 mm and 62 mm
Offset (overall width): 14 mm
Inner diameter of the crown: 94 mm
Rear sprocket dimensions shown on the diagram
It is essential that you you check the type of drive train you need before ordering. On mopeds we find mostly 415 (width 4.5 mm, center distance 12.7mm). All the parts of the kit namely the pinion, the chain and the crown must imperatively be same type.
To mount a chain with a split link you just need multigrip pliers and perhaps a flat screwdriver. If you need to shorten it you will need a chain splitter. To avoid that count the number of links needed to order the right length.
Compatibility models for guidance, it is advisable to disassemble the part to be replaced beforehand and check the correspondence with pictures and dimensions indicated on the site.